Brass Angle Valve; Brass Plumbing Valve; Brass Genius ValveBrass Angle Valve with Chrome plated polished ;with zinc alloy polished hand wheel
Brass Angle Valve with FIP MIP Compression connector; USA type Angle Valve with Flare connector 3/8" 1/4" 1/2" 3/4"
Straight Valve. Angle Valve Meet NSF61 Standard Low Lead; Plumbing Valve
Heavy Duty Bar Stock Construction ;Stainless steel or Nylon Riser for complete leak-Free Connection
Plumbing shut off Valves; Straight shut off Valves 1/4” Turn
2 way or 3 way shut off valves 1/2” FIP X 3/8” Flare

Technical Requirement: Before assembling, all parts should be clean, no oil or grease, remove all burrs and sharp edges. Before connecting, body cap male thread should be coated with sealing glue. Handle turn or close freely. After assembling, test by water at pressure no less than 0.6MPA, no leakage.

For Compression Connection
Clean and Remove all Burrs from the inside and outside of copper tubing. Be sure that the tube is round.
Place compression nuts over supply tube, Threads facing out. Place compression sleeve onto supply Tube.
Using Two wrenches (One on compression nuts and one on the Valve body) Tighten compression nuts onto stop Valve body. Do not use thread seal tape. Be sure that the copper tube is inserted all way into stop valve. Us cloth or tape to protect chrome finish on stop valve. Tighten securely.
Check for leaking
For Female IPS Compression
Place thread seal over clean threads.
Screw stop valve onto pipe and tighten secure while threading the stop valve to avoid creating leaks behind walls. Us cloth or tape to protect chrome finish on stop Valve
Check for leaks.

Brass Plumbing Ball Valve Water Genius Ball Valve
1.Valve is used for preventing the back-going of medium in pipelines and equipments, and the pressure of medium will bring the result of opening and closing automatically.When the medium is back-going, valve disc will automaticaly closed to avoid accidents.
2.
Working Temp: 100 °C
Working Pressure: PN10 or PN16
Suitable Media: Water,Steam,Oil ect.